• 首页期刊简介编委会刊物订阅专栏专刊电子刊广告合作联系我们English
引用本文:樊如强,金学英,胡荣,陈鹏,王建斌,傅宏征.大孔树脂分离纯化刺五加中紫丁香苷、刺五加苷E和异嗪皮啶的工艺研究[J].中国现代应用药学,2014,31(3):302-307.
FAN Ruqiang,JIN Xueying,HU Rong,CHEN Peng,WANG Jianbin,FU Hongzheng.Study on Separation and Purification of Syringin, Aleutheroside E and Isofraxidin from Acanthopanax Senticosus by Macroporous Resin[J].Chin J Mod Appl Pharm(中国现代应用药学),2014,31(3):302-307.
【打印本页】   【HTML】   【下载PDF全文】   查看/发表评论  【EndNote】   【RefMan】   【BibTex】
←前一篇|后一篇→ 过刊浏览    高级检索
本文已被:浏览 2577次   下载 1919 本文二维码信息
码上扫一扫!
分享到: 微信 更多
大孔树脂分离纯化刺五加中紫丁香苷、刺五加苷E和异嗪皮啶的工艺研究
樊如强1,2, 金学英2, 胡荣2, 陈鹏1,2, 王建斌1, 傅宏征1
1.北京大学医学部,天然药物及仿生药物国家重点实验室,北京 100191;2.扬州大学医学院药学系,江苏 扬州 225001
摘要:
目的 研究大孔树脂分离纯化刺五加中紫丁香苷、刺五加苷E和异嗪皮啶的工艺。方法 比较了4种不同类型的大孔树脂对刺五加中紫丁香苷、刺五加苷E和异嗪皮啶的吸附解吸性能,确定适宜的树脂类型和最佳纯化工艺条件。结果 AB-8型大孔树脂对紫丁香苷、刺五加苷E和异嗪皮啶的吸附性能及解吸效果较好。最佳工艺条件为上样浓度:0.5 g·mL-1,吸附流速:2 BV·h-1,上样量:5 BV,洗脱剂:30%的乙醇,用量:11 BV,洗脱流速:1 BV·h-1。纯化后的终产品中紫丁香苷、刺五加苷E和异嗪皮啶的含量分别为3.13%,1.82%和0.42%。结论 AB-8型大孔树脂用于同时富集紫丁香苷、刺五加苷E和异嗪皮啶效果最佳,是一种理想的分离纯化介质。
关键词:  刺五加  紫丁香苷  刺五加苷E  异嗪皮啶  大孔树脂
DOI:
分类号:
基金项目:国家自然科学基金项目(面上项目,重点项目,重大项目)
Study on Separation and Purification of Syringin, Aleutheroside E and Isofraxidin from Acanthopanax Senticosus by Macroporous Resin
FAN Ruqiang1,2, JIN Xueying2, HU Rong2, CHEN Peng1,2, WANG Jianbin1, FU Hongzheng1
1.State Key Laboratory of Natural and Biomimetic Drugs, Peking University Health Science Center, Beijing 100191, China;2.Department of Pharmaceutics, School of Medical Academy, Yangzhou University, Yangzhou 225001, China
Abstract:
OBJECTIVE To study the separation and purification technology of syringin, eleutheroside E and isofraxidin from Acanthopanax senticosus by macroporous resin. METHODS The adsorption and desorption rate of four types of macroporous resins was compared, so as to determine the proper kind of resin and the best condition for purifying. RESULTS The adsorption and isolation effect of AB-8 resin was much better. The optimal conditions were as follow: the concentration of sample solution was 0.5 g·mL-1, the adsorption flow rate was 2 BV·h-1, the maximum loading amount was 5 BV, the eluent was 30% ethanol, the dosage was 11 BV and the elution flow rate was 1 BV·h-1. Under the optimal conditions, the content of syringin, eleutheroside E and isofraxidin in purified powder was 3.13%, 1.82% and 0.42%, respectively. CONCLUSION AB-8 is an ideal resin with the best enrichment for separating and purifying syringin, eleutheroside E and isofraxidin simultanously.
Key words:  Acanthopanax senticosus  syringin  eleutheroside E  isofraxidin  macroporous resin
扫一扫关注本刊微信