• 首页期刊简介编委会刊物订阅专栏专刊电子刊广告合作联系我们English
引用本文:付茂琦,余祥彬,王龙坤,袁建华.TC-1静脉脂肪乳剂的制备[J].中国现代应用药学,2013,30(12):1271-1276.
FU Maoqi,YU Xiangbin,WANG Longkun,YUAN Jianhua.Preparation of TC-1 Intravenous Fat Emulsion[J].Chin J Mod Appl Pharm(中国现代应用药学),2013,30(12):1271-1276.
【打印本页】   【HTML】   【下载PDF全文】   查看/发表评论  【EndNote】   【RefMan】   【BibTex】
←前一篇|后一篇→ 过刊浏览    高级检索
本文已被:浏览 3004次   下载 2037 本文二维码信息
码上扫一扫!
分享到: 微信 更多
TC-1静脉脂肪乳剂的制备
付茂琦1, 余祥彬2, 王龙坤2, 袁建华3
1.福建医科大学,福州 350004;2.福州辰星药业有限公司,福州 350007;3.上海惠同贸易有限公司,上海 210000
摘要:
目的 研制和生产TC-1静脉脂肪乳剂,以期为临床提供解救高血压危象的新型药物制剂。方法 处方配比为TC-1 0.5 mg·mL-1、精制蛋黄卵磷脂1.2%、甘油2.2%。注射用大豆油20%;通过初乳制备、高压匀化、灌装封口、热压灭菌等工序制得TC-1静脉脂肪乳注射液,并在(5±2)℃条件下考察制剂6个月内的稳定性。结果 3批小批量试验的检验结果,用动态光散射法测定平均粒径<0.3 μm、粒度分布均匀、无>1 μm粒子,稳定性均符合中国药典2010年版及日本药局方的要求。结论 确定了超高压微射流均质机-MiniDeBEE制备含药静脉脂肪乳的关键设备条件、工艺参数,解决了工程配套问题,所取得的成果有利于脂肪乳剂的生产。TC-1静脉脂肪乳注射液的成功研制,为含药静脉脂肪乳的制备及稳定性研究提供了一套切实可行的方法。
关键词:  TC-1  静脉脂肪乳剂  稳定性
DOI:
分类号:R944
基金项目:福建省区域科技重大项目(2010Y3001)
Preparation of TC-1 Intravenous Fat Emulsion
FU Maoqi1, YU Xiangbin2, WANG Longkun2, YUAN Jianhua3
1.Fujian Medical University, Fuzhou 350004, China;2.Chenxing Pharmaceutical Co., Ltd, Fuzhou 350007, China;3.Shanghai Whacko Trade Co., Ltd, Shanghai 210000, China
Abstract:
OBJECTIVE To prepare fat emulsion of TC-1 for treatment of hypertensive crisis. METHODS The formula consisted of 0.5 mg·mL-1 TC-1, 1.2% purified lecithin, 2.2% glycerol and 20% soybean oil. The procedure included coarse emulsion production, high-pressure homogenization, filling and sealing, autoclaving, quality tests, etc; and the stability of the preparation in 6 months under (5±2)℃ was tested. RESULTS The quality test results of the 3 batches of products showed that the average diameters was <0.3 μm measured by DLS, the distributions of particles were uniform, and there was no >1 μm particles, and the stability were found according to CP and JP. CONCLUSION The study focuses on the latest homogenizer named MiniDeBEE applying in the production of an intravenous fat emulsion in order to find out the machinery terms, operating data and solve the engineering problems. The results of this study are good for improving the production equipment of fat emulsion. The practical method of the study is useful to other intravenous fat emulsion containing drugs in production or stability research.
Key words:  TC-1  intravenous fat emulsion  stability
扫一扫关注本刊微信